Euroindustriel offers low maintenance, high performance bearings, which are designed for reduced friction, high accuracy, better tolerance and high load bearing capacity.
Ball bearings are the most common and used bearings that are durable in operation and easy to maintain. They are used to reduce rotational friction and support radial and axial loads. They have low frictional torque and are thus suitable for high speeds. Euroindustriel offers wide range of 'deep groove ball bearings', 'angular contact ball bearings' and 'self-aligning ball bearings' for different application needs.
Deep groove ball bearings are common bearing type. These low friction are designed for low noise and vibrations that ensures high rotational speeds. They suit both radial and axial loads in both directions and are easy to mount and require low maintenance.
| Bore Diameter | up to 1700 mm |
| Outer Diameter | up to 2100 mm |
| Width | up to 200 mm |
Angular contact ball bearings have the line of action of the load at the contacts between balls and raceways, which forms an angle with the bearings axis. This results in increased axial load carrying capacity of bearings.
| Bore Diameter | Single Row: up to 1250 mm Double Row: up to 300 mm |
| Outer Diameter | Single Row: up to 1750 mm Double Row: up to 400 mm |
| Width | Single Row: up to 220 mm Double Row: up to 100 mm |
In a self-aligning bearing, the inner ring has two raceways and the outer ring has a single spherical raceway with its center of curvature coincident with the bearing axis. This permits the axis of the inner ring, balls and cage to deflect around the bearing center, which automatically correct angular misalignment caused by housing and shaft machining or installation error.
| Bore Diameter | up to 250 mm |
| Outer Diameter | up to 350 mm |
| Width | up to 75 mm |
Rollers have a higher radial load bearing capacity and are designed to accept relatively faster speeds than other styles of roller bearings. Roller bearings are used for low speed applications. Some roller bearings are self-aligning type, and easily overcome misalignment and mounting issues thereby cutting down on maintenance and labour cost. Euroindustriel offers wide range of 'cylindrical roller bearings', 'tapered roller bearings' and 'spherical roller bearings' for different application needs.
Cylindrical roller bearings have the cylindrical rollers which are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds. These are suitable for applications faced with heavy radial loads and high speeds and offer high stiffness, low friction and long service life.
| Bore Diameter | Single Row: up to 1700 mm Double Row: up to 1500 mm Four Row: up to 1400 mm |
| Outer Diameter | Single Row: up to 2100 mm Double Row: up to 2300 mm Four Row: up to 1900 mm |
| Width | Single Row: up to 400 mm Double Row: up to 800 mm Four Row: up to 1400 mm |
The inner and outer ring raceways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main axis of the bearing. This design suits combined loads, i.e., acting radial and axial loads, hence a true rolling action and subsquently low frictional moments during operation.
| Bore Diameter | Single Row: up to 1300 mm Double Row: up to 3500 mm Four Row: up to 1400 mm |
| Outer Diameter | Single Row: up to 1500 mm Double Row: up to 4000 mm Four Row: up to 1800 mm |
| Width | Single Row: up to 200 mm Double Row: up to 500 mm Four Row: up to 1000 mm |
Spherical roller bearings typically consist of an inner ring with two raceways inclined at an angle to the bearing axis, an outer ring with a common spherical raceway, spherical rollers, cages. The design of these bearings ensures that they are naturally self-aligning and can handle very heavy radial and axial loads at moderate speeds.
| Bore Diameter | up to 1800 mm |
| Outer Diameter | up to 2200 mm |
| Width | up to 600 mm |
